English Manual
Page 9
1019548-A
Assembly
6.
Adding Spreader Mount
The assembly process for the next few steps will vary depending on the brand of spreader you're using:
Fig. 4
Align the spreader mount (
3
) with the adjustment
plate (
2
) as illustrated below. (Fig. 4)
Add a 3/8" washer (
13
) to two 3/8 hex bolts (
11
).
Run these bolts through the adjustment plate (
2
)
and the spreader mount (
3
). Secure with another
3/8" washer (
13
) and 3/8" nylon lock nut (
7
).
Tighten the bolts down.
Fig. 5
Align the spreader mount (
3
) with the adjustment
plate (
2
) as illustrated below. (Fig. 5)
Add a 3/8" washer (
13
) to two 3/8 hex bolts (
11
).
Run these bolts through the adjustment plate (
2
)
and the spreader mount (
3
). Secure with another
3/8" washer (
13
) and 3/8" nylon lock nut (
7
).
Tighten the bolts down.
SPYKER
LESCO
13
13
13
13
11
7
13
13
13
13
11
7
3
3
