1.
Insert upper spinner
shaft into the bottom of
hopper so that the end
with the hole for the
agitator wire goes up
into the hopper.
3.
Slide coupling onto
upper spinner shaft.
Spinner Assembly
5
2.
Slide spinner onto
upper spinner shaft.
4.
Connect upper spinner
shaft and lower spinner
shaft by sliding coupling
down to secure
4.
Attach two bar (16) to
frame (43) loosely with
2 bolts (44) and 2 nuts
(32).
7.
Attach hitch plates (20)
to tow bar (16) using 2
bolts (44) and 2 nuts
(32). Now tighten all
bolts securely.
6.
Attach tow bar braces
(19) loosely to frame
(43) with 2 bolts (44)
and 2 nuts (32).
Spreader Assembly
cont.
4
5.
Attach two bar braces
(19) loosely to tow bar
(16) using 1 nuts (32).
