SPYKER 297, Руководство по эксплуатации Инструкция по обслуживанию Перечень запасных частей

Страница: 2 / 10

1.
Attach lever control
mount bracket (17) to
hopper with 2 bolts (44)
and nuts (32) going
through the lip of the
hopper.
NOTE: Use two washers
(45) between bolt head
and hopper.
Next, bolt control bar
brace (18) to control
bar using 1 bolt (46)
and nut (32) to attach
the controlbar brace
(18) to the hopper.
3.
Attach frame (43) to
hopper (28) using 4
bolts (28) using 4 bolts
(44) with 4 plastic
washers (45) and 4
nuts (32).
2.
Sit the frame (43) on
the hopper (28) and
slide the bump bar (15)
into frame, making sure
that the holes in bump
bar align with holes in
frame.
Spreader Assembly
cont.
3
Assembly Instructions
2
For Quick and Easy Assembly - First Read Entire Procedure
Then Follow Carefully The Step by Step Instructions
Parts you will use:
Parts for Models: 297/299
• (1) Upper Spinner Shaft
• (1) Coupling
• (1) Spinner Clip
• (7) Plastic Washer
• (1) Felt Washer
• (1) Spinner
• (13) 1/4-20 x 2 Bolt
• (2) 1/4-20 x 1-3/4 Bolt
• (17) 1/4-20 Nut
• (1) 1/4-20 x 3/4 Truss Head Bolt
• (1) Tube End Cap
• (2) Brace
• (2) Hitch Plate
• (1) Agitator Wire
• (1) Bump Bar
• (1) Tow Bar
Tools you will need:
Screwdriver
7/19 Wrench
Pliers