Powering the recorder on (standby mode)
Press and hold the power button for 2-3 seconds.
The status light will light up both blue and red.
After a couple of seconds the red light will go
out and just the blue light will be illuminated.
The device is now in standby waiting for further
instructions.
Recording video
From standby mode, press the video record but-
ton once. The blue light will flash twice, and then
go out. The watch will now be recording.
To stop recording, press the audio record button,
and while the blue light is flashing, press the video
record button. The watch will return to standby
mode.
Recording audio
From standby mode, press and hold the audio
record button until the status light starts to flash
red. The watch is now recording audio. To stop
recording audio, press the audio record button.
The status light will turn blue, and the device is
now back to standby mode.
Taking photos
From standby mode, press the photo record
button. The status light will turn red then back to
blue, indicating a photo has been taken.
Powering off the recorder
Press and hold the power button until the status
light blinks red 3 times then goes out.
If you’re still have problems, you can email us at
[email protected], or phone 0117 325
2470. Please have your order number to hand to
help us quickly identify your product.
Setting date & time for video timestamp
On the CD you will find a file called time.txt
To set the date and time, first copy this file on to
your computer. It doesn’t matter where, as long as
you can find the file once you have saved it. Once
copied open this file.
It contains the date and time in the format YYYY.
MM.DD HH:MM:SS Y
Edit the file to the current date and time, for
example. At 3PM on the 14th October 2013 the file
would be changed to read:
2013.10.14 15:00:00 Y
Once you have set it to the current date and time,
save the file. Then connect the watch to your
computers USB, and copy the saved time.txt to
the watch storage. Now disconnect the watch and
power it on. The date and time will be updated to
the information in the file.
All done!
Storage Capacity
4GB
USB interface
USB 2.0
Weight
100g (approx.)
Minimum illumination
1 LUX
Video Format
AVI
Video Resolution
1280x960
Framerate
30fps
Photo Format
JPG 3264x2448
Battery Life from Full
1.5 Hours
Battery
DC 5V 200MA
Storage Temperature
-20 °C to 80°C
Problem
Solution
Won’t turn on
Ensure the battery is
fully charged
Blue light flashes
rapidly
Restart the camera,
check the battery is
charged and that the
SD card has space
Sound or Video
distortion in
recordings
Fully charge the unit
Not detected by your
PC
Ensure that the USB
connector is fully
pushed in to the watch
Troubleshooting
