background image

CNR-SW2  Manual v1.0 

Canyon NavMaster 

Features 

Altimeter 

z

 

Altitude Measuring Range : -500 to 9000 meter or -1,600 to 

29500 feet 

z

 

Resolution of 0.5 meter or 1 feet 

z

 Total 

Altitude 

Gain 

z

 

Trip timer : 9 hr 59 min 59 sec 

z

 

Current ascending or descending Speed 

z

 

Average ascending or descending Speed

 

Electronic Compass 

z

 

3-mode display showing a compass arrow direction, numeric 

and cardinal readouts 

 

z

 

with highly accuracy of +-5 degree and a resolution of 1 

degree 

z

 

a magnetic distortion alerts “Err” when external magnetic 

interference occurs 

 

z

 automatic 

shut-off

 

Thermo Alarm Clock 

z

 

Perpetual calendar with day of week 

z

 

Snooze alarm clock 

z

 Thermometer 

(-10 

degree 

  to + 50 degree 

 ) 

z

 12/24 

hr,   selectable 

z

 

Max/Min memory for Thermometer

 

Battery Installation 

Computer Watch 

Remove the back cover of the computer with a screwdriver, install 

the 3.0V-battery with the po) pole facing up and replace the 

cover.    Remove the battery and reinsert it if the LCD displays 

irregular figures. This will clear and restart the computer’s 

microprocessor. 

 

3V-Battery CR2032

 

Display Icons & Keys Illustration 

 

Icons: 

Heading Direction                    Time mode 

Alarm ON / OFF         Afternoon 

Alarm Snooze           Temperature in Celsius 

Battery Low             Temperature in Fahrenheit 

Compass mode          Maximum memory 

Altimeter mode           Minimum memory 

 

To wake Up and set your computer 

z

  Press and hold both button A and C until all segments on. 

Meter / Feet Selection 

Right after all segments on, the “M” digit will start to flicker. 

To select M (Meter) or Ft (Feet), press button C and then press 

button A to confirm. 

 

 

 

Selection 

z

 

Right after Meter/Feet selection, the Celsius digit will then 

start to flicker 

z

 To 

select 

 or , press button C and then press button A to 

confirm.

 

 

 

 

Clock Setting 

z

 Right 

after    selection, the “24H” digits will then start to 

flicker, press button C to select 12H or 24H hour format 

z

 

Press button A to confirm and then the hour digits will start to 

flicker. 

Содержание NavMaster CNR-SW2

Страница 1: ...tery with the positive pole facing up and replace the cover Remove the battery and reinsert it if the LCD displays irregular figures This will clear and restart the computer s microprocessor 3V Battery CR2032 Display Icons Keys Illustration Icons Heading Direction Time mode Alarm ON OFF Afternoon Alarm Snooze Temperature in Celsius Battery Low Temperature in Fahrenheit Compass mode Maximum memory ...

Страница 2: ...he Digital Altimeter z Press button D to enter the Altimeter mode z To set the altitude press button C to enter T trip timer mode first Press button A to stop the timer and then hold button A again until the symbol start to flicker z Press button C to select for the ascending altitude gain counting or for the descending altitude loss counting z Press button A to confirm and then the first digit of...

Страница 3: ...which always points to the south No matter what the current compass s orientation is the NORTH and SOUTH can easily be identified by and Compass Calibration and Environmental Interference z It is important to know that all digital compasses work with Earth s magnetic field and are very sensitive to different environments where the earth magnetic field is distorted such as interference of closing t...

Страница 4: ...ontinuously displayed please calibrate the compass again z Please hold the compass as horizontal as possible to get a precise direction Temperature z The temperature displayed is the temperature of the case inside Hence it is influenced by your body temperature z To display the actual temperature the watch must be taken off the hand for about 15 to 30 minutes and must not be exposed to direct sunl...

Отзывы: