SPX W+ Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 24

SPX W+ Скачать руководство пользователя страница 5

1

453343 ISS S 07.2010

Congratulations, you are the owner of a quality built item from SPX Flow
Technology. This pump was manufactured by the skilled personnel of a
company which has served the needs of the dairy, food and process
industries for more than 100 years.

The purpose of this manual is to provide instructions for the safe installation,
operation and maintenance of your SPX Flow Technology equipment.

Read and understand the entire manual before removing from the crate and
installing the equipment.

SPX Flow Technology is committed to providing quality equipment and
customer satisfaction. We have a unique network of sales and service
support throughout the world, which are listed in this manual. Please note the
office located nearest to you. Should you have any questions concerning any
information contained in this manual, contact SPX Flow Technology in
Delavan, WI at 1-800-252-5200 for assistance.

Standard Warranty

Obligations of Seller

During the warranty period, the Seller shall repair, or at Seller's option,
replace parts determined by the seller to be defective in material or
workmanship. The warranty period is one (1) year from the date of delivery to
Buyer F.O.B. point of manufacture. The foregoing shall be the sole obligation
of the seller under this warranty with respect to the equipment and the other
property included in this agreement. With respect to the equipment, materials,
parts and accessories manufactured by others, seller's sole obligation shall
be to use reasonable efforts to obtain for the Buyer the full benefit of the
manufacturer's warranties

Warranty Exclusions

Repair or replacement of parts required because of misuse, improper care or
storage, negligence, alterations, accident, use of incompatible supplies or
lack of specified maintenance are excluded from the Seller's warranty
obligations.

Disclaimer of Warranties

The foregoing warranty expressions are in lieu of all other warranties,
expressed or implied, including implied warranties of merchantability and
fitness for a particular purpose, and existence of any such other warranty is
hereby denied.

Limitation of Liability and Remedies

The liability of the Seller for breach of any warranty obligation hereunder is
limited to:

1.

The repair or replacement of the equipment on which the

liability is based or,

2.

At the Seller's option, the refund to the Buyer of the amount paid by

the Buyer to the Seller for said equipment.

Introduction

«
...
3
4
5
6
7
...
»

Содержание W+

























Отзывы:

Нет отзывов