RD5100H
2
O+ Operation Manual
12
© 2018 Radiodetection Ltd
2 If using a Li-Ion battery pack un-plug the lead
connector (Refer to Figure 4.7).
3 Lift the accessory cover slightly and press the battery
retaining latch inwards.
Figure 4.4: Press the retaining latch inwards
4 Rotate the battery pack away and up from the latch.
5 Repeat on the other side to release the battery pack
completely then lift the battery pack away.
Figure 4.5: Repeat then lift the battery pack away
To fit a new battery, lift both accessory covers slightly,
then gently push the replacement pack into place until it
clicks on both sides, then close the battery pack.
Figure 4.6: Installing a new battery pack
If using the Li-ion battery pack, plug the lead into the
battery connector (Refer to Figure 4.7).
Figure 4.7: Connecting the Li Ion lead
NOTE: Fully charge your lithium-ion battery pack before
its first use.
Transmitter battery pack:
1 Unlatch then remove the accessory tray.
