Optical measuring technique:
turbidity measurement
colour measurement
concentration measurement
Ultrasonic measuring technique:
concentration measurement
density measurement
Sight glass:
with and without illumination.
5.
Cleaning
As a result of the design of the Inline housing being free of dead
spaces (no sump and no dome) all product-wetted parts can be
cleaned properly during the cleaning process.
6.
Installation
The housing must be installed in such a way that a faultless
function of the measuring device is given. Moreover, the installation
must allow for fluids to drain off the housing.
With horizontal installation, measuring devices must be installed
vertically.
Attention!
- Observe
welding
instructions!
6.1 Welding
Instructions
Before welding, the measuring devices and the housing cover must
be removed. See to a careful handling to avoid damage.
-
Welding may only be carried out by certified welders (EN 287-1).
(Seam quality EN 25817 „B“).
-
The welding of the valve housings must be effected in such a way
that deformation strain cannot be transfered to the valve body.
4.
Measuring Device
4
Inline Measuring Techniques
Operating Manual
Rev.0
UK
