SPX APV DELTA MF4, Руководство по эксплуатации

Страница: 9 / 35

4.1 Valve position indication (fig. 4.1)
For the valve position indication, a proximity switch holder (PSH)
can be installed direct on the actuator.
To signal the limit position of the valve seat, proximity switches can
be mounted to the holder if required.
We recommend our APV standard types:
operating distance: 5 mm / diameter: 11 mm.
If the user decides to apply valve position indicators other than
APV type, we cannot take over the liability for any malfunctions
resulting therefrom.
4.2 Control Unit (fig. 4.2)
The assembly of a control unit on the MF4 valve is possible.
The following designs are available:
4. Auxiliary Equipment
4
valve position
indication
PSH
fig. 4.2
fig. 4.1
- For the assembly of the control unit on the MF4 valve an adapter
is required.
solenoid valve (SV)
CU31 Direct Connect
16 - 31 - 232/93
CU21V
16 - 31 - 237/93
CU31 Device Net
16 - 31 - 240/93
CU31 AS-interface
16 - 31 - 244/93
Direct Connect
ref.-No.:
Profibus
ref.-No.:
Device Net
ref.-No.:
AS-Interface
ref.-No.:
adapter
CU2 - adapter SW4 / SD4 / M4
08-48-415/93
designation:
ref.-No.:
4.3 Connections:
Beside the housings with weld ends, the following connections
are alternatively available:
- threaded port according to DIN 11851
- threaded port IDF / ISS according to ISO 2853
- threaded port RJT according to BS 4825-5
- threaded port SMS
- threaded port according to DS 722
- flange connection FGN1 DIN
- flange connection FGN1 Inch
- clamp connection according to DIN 32676
- clamp connection according to ISO 2852
UK
DELTA MF4-UK0.qxd / 12.2004
Membrane Valve with Bellow Unit
DELTA MF4
Operating Manual rev. 0