manualshive.com logo in svg

SPX FLOW APV DELTA SW4, Инструкция по эксплуатации, Страница: 26 / 48

Поделиться
Скачать
SPX FLOW APV DELTA SW4 Скачать руководство пользователя страница 26

21

APV_SW4_UK-4_082017.indd 

UK

Single seat and change-over valve

DELTA SW4

Instruction manual: UK - rev.4

APV

14.   Assembly Tool

         

The assembly tool consists of:

 

-   nut          

 

-  thrust ring 

 

-  ring with venting nose

  - housing 

 

-  threaded bolt

 

  

Installation of seat seal in the valve shaft

 

1.

  Insert the valve shaft into the housing in such a way that

 

the seal groove is in the housing. 

 

2.

  Clamp the shaft into the housing by means of the threaded bolt. 

 

 

Clamp the housing in a vice.

 

3.

  Slightly grease the seat seal with APV assembly grease.

 

 

Then install the seal on the ring with the venting nose until it stops.  

           

 

4.

  Introduce the ring with the installed seat seal into the housing and

 

press it down until it stops sensibly. 

 

5.

  Insert the thrust ring into the housing. Screw on the nut and tighten

 

it with a hook spanner until it stops. 

 

6.

  Release the nut. Take ring and thrust ring off the housing.

 

7.

  Take housing out of the vice, take off the threaded bolt. 

    

Detach the valve shaft from the housing

         

  

Check the even fit of the seat seal.

  

 

 

To simplify the installation of the seat seal, the following  

 

 

 

assembly tools are available:

14.1.  Assembly tool for seat seal

DN

Inch

Reference No.

ID-No.

25

1"

000 51-13-110/17

H179465

40

1,5"

000 51-13-111/17

H179466

50

2"

000 51-13-112/17

H179467

2,5"

000 51-13-120/17

H179468

65

000 51-13-113/17

H179469

3"

000 51-13-121/17

H179470

80

000 51-13-114/17

H179471

100

4"

000 51-13-115/17

H179472

housing

valve shaft

threaded bolt

seat seal

ring

nut

thrust ring

Содержание APV DELTA SW4

















































Отзывы:

Нет отзывов