SPT WA-1288E, Инструкция по эксплуатации

Страница: 17 / 21

Clean the Unit
Store the unit when not in use
Clean the unit using a damp, lint-free cloth and mild detergent. Dry the
unit with a dry, lint-free cloth.
-Drain the unit’s bottom tray according to the instructions in
the following section.
-Run the appliance on FAN mode for 12 hours in a warm room to dry
it and prevent mold.
-Turn off the appliance and unplug it.
-Clean the air filter according to the instructions in the previous section.
Reinstall the clean, dry filter before storing.
-Remove the batteries from the remote control.
Be sure to store the unit in a cool, dark place. Exposure to
direct sunlight or extreme heat can shorten the lifespan
of the unit.
16
Maintenance Tips
-Always unplug the unit before cleaning or servicing.
-DO NOT use flammable liquids or chemicals to clean the unit.
-DO NOT wash the unit under running water. Doing so causes
electrical danger.
-DO NOT operate the machine if the power supply was damaged
during cleaning. A damaged power cord must be replaced with a
new cord from the manufacturer.
Clean the Air Filter
-Be sure to clean the air filter every 2
weeks for optimal performance.
-The water collection tray should be
drained immediately after P1 error occurs,
and before storage to prevent mold.
-In households with animals, you will have
to periodically wipe down the grill to
prevent blocked airflow due to animal hair.
Remove the air filter
Air filter
(take out)
Maintenance
WARNING:
CAUTION
DO NOT operate the unit
without filter because dirt
and lint will clog it and
reduce performance.