4
1.
Freezer Compartment Door
2.
Drip Tray
3.
Steel Wire Shelf
4.
Leveling Leg
5.
Thermostat
6.
Steel Wire Bar
Note: This figure is only a sketch of the refrigerator. The actual product may differ slightly.
Setting the Temperature Control Knob
•
The settings of the temperature control are "0,1,2,3,4,5,6,".
•
0 is OFF and 6 is the coldest setting.
•
When operating the refrigerator for the first time, run it without loading any
food until it auto stops at the desired temperature. Usually takes 2 or 3
hours.
•
A medium setting at 3 or 4 is the most suitable for general operation.
•
The temperature range is approximately 32 ~ 50°F
NOTE
•
Turning the temperature control to “0” stops the cooling cycle, but does not shut off the unit.
•
If the unit is unplugged, power lost or turned off, please wait 10 minutes before restarting the unit.
The unit will not start if you attempt to restart before this time delay.
•
It is strongly suggested to place this refrigerator in the coolest area of the room, which can help
conserve energy consumption. If the ambient temperature is too high, the refrigerator may not be
able to target the set temperature.
•
Avoid opening the door during power outages.
TEMPERATURE CONTROL
PARTS IDENTIFICATION