6
Change Humidity Setting
•
To change set humidity: Press SETTING button twice and SET RH will flash. Press
or
−−−−
button
to set desired humidity setting. Range is 0 to 99.
•
Press SETTING button again when done.
•
Once the unit sense that the room humidity has reached set humidity, unit will cease to deliver
mist output. Once the room humidity level falls below the set humidity level, unit will resume to
deliver mist output.
Note: When unit is initially turned on (or after power has been disconnected), unit will operate at
default settings: Room Temp display in
°
C, Humidity set at 80 and mist level at 5. If unit is powered
off (without disconnecting power), last settings will be remembered and unit will operate accordingly.
D. Night Light
•
Press LIGHT button to turn color-changing night light on or off.
Note: unit continues to deliver mist output while adjusting any of the above settings. However, ION
and LIGHT buttons will not respond if you’re changing the temperature display or setting humidity
level. Please make sure display is return to normal before attempting to turn ION or LIGHT on/off.
PROTECTION FEATURES
This unit is equipped with the following protection features:
•
Water Shortage Protection: If the water within the tank falls below a certain level, the unit will
automatically stop operating.
•
Humidity Control: When ambient humidity achieves the set humidity level, unit will stop mist output.
•
Tank Alignment Control: When tank is not properly placed or moved out of position during operation,
unit will automatically shut down.
STORAGE
•
Save the box for off-season storage.
•
Clean the tank, reservoir and all part thoroughly and dry before storage.
•
If water is left in the unit during storage, it may harden and leave deposits that may affect the unit
from operating properly.
•
Leave the cap of the water tank loose. This will prevent the cap and gasket from sticking together and
prolong the life of the gasket.
