SPT Labtech apricot S1, Руководство пользователя

Страница: 7 / 24

© 2021 SPT Labtech Ltd
sptlabtech.com/support
6
1.2
– Inspection and Set-Up
Care should be exercised when unpacking the crate.
o
Inspect the instrument for any visible damage that may have occurred during
shipping.
After confirming that there is no damage you can start the installation of the apricot
S1.
o
Re-assemble and save the shipping crate for future use.
o
We recommend that you read through the Operating Instructions Manual before
you start the install process.
o
Place the instrument on a sturdy and level surface.
o
Use appropriate caution when operating this instrument.
o
Verify that the ON/OFF switch is in the OFF position.
o
Using the power cord provided connect the instrument entry connector and
connect the opposite end to a power outlet with a ground connection.
o
The instrument is ready to turn on. Press the ON/OFF switch to the ON position.
DO NOT PLUG IN OR TURN ON
THE SYSTEM
Contact SPT Labtech immediately –
take a picture of the damage and
send it to
apricotsupport@sptlabtech.com, and
contact the freight carrier.