Sprue Safety Products FireAngel CO-9X, Руководство пользователя

Страница: 18 / 28

18
Press and hold the Test/Silence button down
with your thumb/finger until the Fault LED
illuminates yellow and the sounder sounds
for a second time (this should happen after
around 5 seconds) Release the Test/Silence
button Upon releasing the Test/Silence button
the Fault LED will flash yellow once every
second This indicates that the sampling rate of
the detector has increased and can be tested
using a known source of CO
Step 3 Light an incense stick using a match or lighter
Be sure to blow out the flame so that the
incense stick is smouldering Extinguish the
lighter, or put out the match and place it into a
dish of water