7
2.2.2 Cutter jamming
If the cutter is stuck, turn off the power switch, re-power, the cutter can return to its original
position.
2.3 Interface connection
2.3.1 USB-TypeA
The Y32 supports four USB-TypeA master interfaces. Each pin is defined as shown in Figure 2-2.
PIN
Assignment
Function
Mark
1
V Bus
Power
Positive5
V
2
Data -
Data
Negative
3
Data +
Data
Positive
4
GND
Power
Ground
Figure 2-2 USB-TypeA
2.3.2 Ethernet Interface
The network port configuration uses an RJ45 network socket. The appearance is
shown in Figure 2-3:
Figure 2-3 Ethernet
2.3.3 USB Interface
The standard configuration of the Y32 smart one is equipped with a standard USB printer
cable D-type data cable for connecting the printer and the host device. The printer's USB is a
