8
3.1.4 Other
Switch door description:
Keep left and right synchronized when opening or
closing the paper compartment cover.
Abnormal operation instructions:
Paper jam is not allowed at the paper exit.
Placement direction
: It is recommended to print flat or flat when printing.
3.2 Basic function usage
Support two Paper Types: Thermal paper, Black mark paper.
Paper width supported: 80mm
、
58mm
、
44mm and 30mm.
Paper type and paper width can be set by setting tool.
3.2.1 Switch On
Press
【
POWER
】
button, you will hear ‘one low one high ’prompt tone. The
LCD shows “Loading...”, then the printer turns into work mode when loosen the
【
POWER
】
button. The LCD shows printer parameter.
3.2.2 Switch Off
Under status of switch on, the printer will send out the prompt tone of ‘one low
one high’ after pressed the
【
POWER
】
button, the LCD turns off, then loosen
the
【
POWER
】
button, the printer is off.
3.2.3 Self-Test
After receiving the printer, user can check its current setting and status at
anytime. Self-test way is as below: Power off, then hold down the
【
FEED
】
button and press the
【
POWER
】
button at the same time. Then loosen the
【
FEED
】
button when you hear ‘one low one high ’prompt tone and LCD
shows “Loading...”, the current setting and status will be printed out.
3.2.4 Paper Feeding (Manual Feeding)
In the power on status, normal thermal paper, press the
【
FEED
】
button, the
