6
2.2 Paper Installation
2.2.1 Paper Loading
POS88
Ⅵ
adopts 79.5mm width thermal paper roll.
Steps of Loading Thermal Paper Are as below:
Hold down the upper cover button on the left side, open the movable upper cover
and put the paper roll into it, draw a certain length of the paper roll, put the paper
end on the print head, close the upper cover and press it downwards lightly.
1.Pay attention to the direction of loading paper,make the printing surface
face to the print head.
2.Please don’t feed or draw the paper forwards or backwards with hands.
3.Keep clean of the print head, avoid to influence the printing quality.
2.2.2 Solution to Paper Jam
If cutter jam, turn off the power, and turn on again, the cutter will be back to original
Power Switch
Cash driver interface
Interface socket
Power socket
！
Caution!
