15
2.8 Printer parameter Settings
This function is for the setup of parameters.
Steps for setting parameters: When printer power is off, open paper case cover
firstly, then press the
【
FEED
】
button and turn on the printer. After status indicator
and paper out indicator flash twice alternatively, press
【
FEED
】
button twice, then
close pape case cover. Printer enters into parameter setting mode and print out the
first set parameter and its default value. The details method of setting parameter
can refer to Appendix A.
Steps for exiting of parameter setup: open paper case cover and press the
【
FEED
】
button; then close paper case cover and release the
【
FEED
】
button. The printer
will save the setup of parameters, exit setting mode and enter the normal working
mode.
The data will not be saved if turn off the printer directly.
2.9 Enter the program upgrade mode
When printer power is off
，
open paper case cover, hold down the
【
FEED
】
button,
then turn on the printer. After the status indicator and paper out indicator flash
alternatively, release
【
FEED
】
button. Then press
【
FEED
】
button five times and
printer enters into the program upgrading mode. At this time, the indicator flashes
once each second.
Quick method of entering this mode: when printer power is off, open paper case
cover, hold down the
【
FEED
】
button, then turn on the printer and release the
【
FEED
】
button. Printer enters into the program upgrading mode. At this time, the
indicator flashes once each second.
Notice: After printer enters into Program Upgrading Mode, if paper out indicator
lights, it means this interface can’t support program upgrading. Only serial interface
or USB interface can support program upgrading online.
