interface with host. Otherwise it needs to repair.
The self-test will print out: Manufacturer name, printer model, software
version, interface type, default value of printer parameters, 96 ANK
characters in ASCII code, content of default Code page (if language is
set English) or name of Chinese character library (if the language is set
Chinese), Bar code type, at last four lines black and white alternating
icon.
Way of self-test: hold down
【
FEED
】
button and press
【
POWER
】
button
to turn on the printer, after buzzer sounds, release
【
POWER
】
button
firstly, then release
【
FEED
】
button. At this time, printer will print out
self-test receipt.
2.8 Hexadecimal Printing
Turn on the printer according to the step below, it will enter the
mode of Hexadecimal Printing
1.Open the cover;
2.Hold down
【
POWER
】
button to turn on the printer
3.Close the cover, the printer will print out 3 lines as below:
Hexadecimal Dump
To terminate hexadecimal dump,
Press FEED button three times.
This means the printer has entered hexadecimal printing mode, and
under this mode,all of the input will be printed out as hexadecimal
number. Paper will feed one line with single-click of “FEED” button, after
3 times, it will print out “*** Completed ***”, and exit hexadecimal
printing mode.
2.9 Setup of printer parameter
This function is for the setup of parameters.
Steps for setting parameters: Power off , open
【
Printer upper
cover
】
and press the
【
FEED
】
button at the same time; release the
【
FEED
】
button after light flashing ; then press the
【
FEED
】
twice and
close the
【
Printer upper cover
】
; printer is in the parameter setting
mode . Print the first parameter which can be set and its current setup;
Details can be seen according Appendix.
Steps for exiting of parameter setup: open
【
Printer upper cover
】
