5
3.1.3 Others
I
nstruction for opening or closing the paper case cover:
Opening or
closing the paper case cover slowly after pressing the OPEN button.
Abnormal operation instructions:
Paper blocking is not allowed at the
outlet.
Placement direction:
Hold it flat and try to ensure the stability of running
paper roll when printing.
3.2 Basic function usage
Printing Modes: Standard Mode and Logistics Mode.
Paper Type: Thermal paper, Black mark paper and Label paper.
Logistics Modes: Way Bill mode, Receipt mode, Invoice mode. Label paper
( 80mm width ) as default under Way bill mode. Receipt paper ( 58mm width )
as default under Receipt mode. Black mark paper ( 58mm width ) as default
under Invoice model.
Standard Modes: 80mm mode, 58mm mode.
Standard thermal paper as default under Standard mode.
Printing modes or paper type can be set by Setting Tool (Way Bill mode and
Invoice mode can’t be changed under the logistics mode)
3.2.1 Switch On
Press the
【
POWER
】
button, you will hear ‘one low one high ’prompt tone.
“Loading...” will shown in LCD, then the printer turns into work mode when
loosen the
【
POWER
】
button. Printer parameters will also shown in the LCD.
3.2.2 Switch Off
Under status of switch on, the printer will send out the prompt tone of ‘one low
one high ’ after pressing the
【
POWER
】
button, the LCD turns off, then loosen
the
【
POWER
】
button, the printer switched off.
3.2.3 Self-Test
After receiving the printer, user can print the self test to check current settings
and status of the printer at anytime.
The printing way is as below: Power off, then hold down the
【
FEED
】
button
and press the
【
POWER
】
button. When you hear ‘one low one high ’prompt
