SPRT POS8810 Series, Руководство пользователя

Страница: 13 / 23

11
press the [FEED] key seven times, close the cover, the printer enters the intelligent network
configuration mode, and the network configuration QR code will be printed out. At this time, the
network configuration operation can be performed, and the [PAPER] blue light will flash for one
second Flashes at intervals.
2. Make sure that the mobile phone is connected to the router and the network is normal. Use the
mobile phone WeChat to scan the QR code on the bottom of the printer to enter the network
configuration interface, and click the "Start Network Configuration" button.
3. Enter the password of the router connected to the mobile phone, and then click the "Connect"
button. The printer will start to configure the network. After the network is configured successfully,
the printer will automatically connect to the router. At the same time, it will print the IP address. In
the local area network, users can send data to the printer through this IP address.
4. If the printer has completed the network configuration, the network configuration information
will be automatically saved, and the next time the machine is turned on, it will automatically
connect Wifi. When it connected successful, the [PAPER] blue indicator light will stop flashing
and become steady on.
2.3.6 Cash Drawer Interface
The cash drawer interface of SP-POS8810 adopts RJ-11 6-pin socket, as Fig.2-5 shows:
Fig.2-5 Cash Drawer Interface
The pin assignment is as below:
Pin No. Signal Direction
1 Chassis Ground ——
2 Cash drawer driver signal 1 Out