Sprog SBOOST, Руководство пользователя

Страница: 3 / 12

SBOOST User Guide 3
Version 1.4 February 2012 © Copyright 2012SPROG DCC
DCC Parameters Minimum Typical Maximum Units
DCC signal input
voltage
7 18 V
DCC signal input
current 10
Note 3
mA
DCC signal input
current 16.5
Note 4
mA
DCC Input
– Track
Output Delay
1.6 µs
3. Vin 12V
4. Vin 18V
LEDs
Track LED
Off Track power off
Flashing Moderately Quick Track power on
Flashing quickly Short circuit
DCC LED
Flashing slowly No DCC signal
Flashing Quickly Valid DCC Signal
Installation
The following steps are required to install SBOOST before you can use it for
the first time:

Connect to the Power Supply

Connect to the Layout

Connect to the Command Station
Connect to the Power Supply
Power supplies sold by SPROG DCC are supplied with a circular DC jack
plug. This should be removed to allow connection to the pluggable terminal
block:

Cut off the DC plug

Separate the two conductors for about 3cm