1
In the Box
2
Where to Set Up
Level surface away from light and heat.
A C
B
Congratulations!
Your new ProWash S is the world’s most advanced system
for cleaning 3D printed parts. Featuring improvements to
our patented Mechanical Jetting
TM
technology and an
all-new, cloud-connected onboard computer, your digital
workflow just got a little simpler.
In this guide, you’ll find everything you need to get started
using ProWash S.
Training and Support
ProWash S comes with complimentary
phone and email support. If you have
questions, please get in touch:
Visit
Call
support.sprintray.com
800-914-8004
[email protected]
ProWash S Device
Drain Hose
Pre-installed
(Section 8)
Cleaning
Brush
(Section 9)
Basket
(Section 7)
Hydrometers
Pre-installed
(Section 4)
Power Cable
USB Cable
(Section 12)
Wash Filter
(Sections 2 & 9)
Metal
Tweezers
(Section 10)
Power Adaptor
Magnet Sticker
(Section 6)
Build Platform
Adaptor
(Section 6)
Onboarding
Card
Set up ProWash S in a well-ventilated area on
a level surface in a temperature-controlled
room. Keep it away from windows and bright
light sources.
Never place anything on ProWash S.
If possible, set ProWash S near your 3D
printer and curing device for optimal
workflow efficiency.
ProWash S comes out of the box
with most parts preinstalled.
The hydrometers are precalibrated
for each chamber and will float when
it’s time to replace IPA. Read more
about hydrometers in section 4.
Automated Multistage Cleaning System
Designed for Digital Dentistry
Quick Start Guide
Version 2 - Updated on 06/28/22
Model SRP2208A
QR Code
Hello Akash :)
