Installation
•
Ensure mechanically secure fi xings are in use as recommended.
•
Ensure cooling airfl ow around the product is as recommended.
•
Ensure cables/wire terminations are as recommended and are torqued correctly.
•
Ensure the product rating is correct - do not exceed the rating.
Application risk
Electromechanical safety is the responsibility of the user.
The integration of this product
into other apparatus or systems is not the manufacturer's or distributor of the product's
responsibility. It is the user's responsibility to ensure the compliance of the installation with
any regulations in force.
Health and safety at work
Electrical devices can constitute a safety hazard.
Thorough personnel training is an aid
to SAFETY and productivity. SAFETY awareness not only reduces the risk of accidents and
injuries in your plant but also has a direct impact on improving product quality and costs.
If you have any doubts about the SAFETY of your system or process, consult an expert
immediately. Do not proceed without doing so. If in doubt, refer to the Supplier.
CAUTION!
EQUIPMENT DAMAGE HAZARD
•
We thoroughly test our products. However, before installation and start-up,
inspect all equipment for transit damage, loose parts, packing materials, etc.
•
Installation must observe the required environmental conditions for safe and
reliable operation.
•
In a domestic environment, this product may cause radio interference, requiring
adequate measures to be taken.
Obtain the permission of the supply authority
before connecting to the low voltage supply.
WARNING!
PERSONAL INJURY AND/OR ELECTRICAL SHOCK HAZARD
•
Always isolate all power supplies from the equipment before starting any work.
•
Never perform high voltage resistance checks on the wiring without fi rst
disconnecting the product from the circuit under test.
•
Use guarding and additional safety systems to prevent injury and electric shock.
•
Metal parts may reach 90°C during operation.
Hazards
This equipment can endanger life through rotating machinery and high voltages.
WARNING!
Only qualifi ed personnel must install, operate and maintain this equipment.
A qualifi ed person is someone technically competent and familiar with all safety
information, established safety practices, installation, operation, maintenance
and the hazards involved with this equipment and any associated machinery.
General risks
