6
Installing iHUD on a dashboard
1. Because of the materials used for the surface of a car’s dashboard are
typically smooth and often coated with varnish, making it difficult to achieve a
strong adhesive bond, it is recommended that before installation, a piece of
cloth moistened with alcohol be used to wipe the surface to the dashboard.
2.
Before installation, the protective film on the base stand’s PVC pad must be
peeled off. (It is recommended that you keep this protective film for future use
in case you decide to remove the base stand and wish to prevent dust from
sticking to it.)
3. Press the iHUD system unit against the
surface of the car’s dashboard (with the
lens cover pointing toward the driver) to
attach it. (If space allows, it is
recommended that you position it close to
the windshield.)
4. If you need to adjust the tilt of the iHUD
system unit, remove the iHUD and tighten
the quick-release screw to appropriate
tightness on the base stand. and then re-
attach the iHUD system unit to adjust the
angle by moving main device.
5. When you need to remove the base stand, simply use your hand to lift up one
corner of the PVC pad.
Adjusting the angle
To accommodate different dashboards, the angle of the iHUD
’s base stand can
be adjusted based on the driver’s height, and the angle of the windshield or
dashboard (up to a maximum of 15° in either direction).
