5
The iHUD
’s base stand
The base stand for iHUD does not require modifying the interior of the car, and
no tools are needed for attaching it to most dashboards. In addition, the base
stand allows for adjustments to the viewing angle of the iHUD system unit to suit
the height of the driver and the slope of the windshield or dashboard surface. The
base stand’s design uses screw that can be loosened or tightened with a coin for
ease and convenience.
Installing the slide rails
1. Insert the included slide rails (
) into the sets of four holes on the bottom of
IHUD system unit (
), then slide them in the direction of the lens until they snap
into place.
2. Secure the slide rails in position with the two screws included in the product
package.
Installing/removing the base stand
Slide the base stand (
) onto the slide rails attached previously until it locks into
place. Reverse directions to detach the IHUD system unit.
