•
Press and hold the CHANNEL button for 3-4 seconds until the RF signal icon is showing.
•
Install the batteries in the new remote sensor or if the batteries have already been installed, press the
TX button (located inside the remote battery compartment) for 2 to 3 seconds.
Locating the Base Station and Remote Sensor
•
Choose a suitable place for the base station and remote outdoor sensor, within the transmission distance.
•
The base station can be wall mounted using the hanger in back of the unit or it can free standing. To
stand the unit, pull the hinged stand away from the base unit then push the stand horizontally into the unit.
•
Place the base unit near a window, but away from direct sunlight or sources of heat or air conditioning
to ensure accurate temperature readings.
•
The remote sensor is water resistant, but not waterproof. Locate the sensor out of direct sunlight, in an
area where it will not be exposed to rain, snow or ice.
•
The location you choose is critical for maximizing the transmission range. The remote sensor is
designed to transmit up to 100 ft. unimpeded. Transmitting through walls, metal doors and metal framed
windows may reduce the transmission range. To optimize the transmission distance, the remote should be
positioned in a location that minimizes these obstructions. Interference from other sources such as home security
systems, wireless doorbells and wireless home entertainment equipment may interrupt the transmission signal
temporarily.
Max/Min Memory
•
Press the MAX/MIN button once to display the lowest indoor and outdoor temperatures recorded
since last reset. MIN is shown on the display.
•
Press MAX/MIN a second time to display the highest indoor and outdoor temperatures recorded since
last reset. MAX is shown on the display.
•
To clear and reset the max/min records, when either the MAX or MIN record is shown on the LCD
display, press and hold MAX/MIN for 2-3 seconds.
RESET
Your multi-zone thermometer can be re-set in case of malfunction. The RESET button is located on the back of
the base unit. Press the RESET button once and the unit will return to its original factory settings.
