Do not tamper with the unit's internal components. Doing so may cause damage. Other than replacing
the batteries, the unit contains no user-serviceable parts.
Do not subject the unit to excessive force, shock, dust, temperature or humidity. This may result in
malfunction, shorter electronic life span, damaged battery and distorted parts.
The unit is intended for indoor use only. It is not sealed against moisture and could be damaged if
used outdoors or in humid indoor conditions. Do not expose the unit to: water, direct heat, a hot
surface or direct sunlight. This may cause damage to the casing or the electric circuits and components
inside.
Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries if the unit will
not be used for a long period of time. Always replace all batteries at the same time; do not mix old and
new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.)
batteries.
NOTE: please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. Do not let children handle batteries.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries
if the thermometer will not be used for a long period of time.
FCC STATEMENT OF COMPLIANCE
Caution: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This equipment has
been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on. The user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Taylor Precision Products / Springfield Precision
2220 Entrada Del Sol, Suite A
Las Cruces,New Mexico 88001
For additional product information, please contact us through www.taylorusa.com or springfieldprecision.com
Made to our exact specifications in China.
© 2012 Taylor Precision Products, Inc. and its affiliated companies, all rights reserved.
Springfield® is a
registered trademark of Taylor Precision Products, Inc. and its affiliated companies. All rights reserved.
96203 7.13
