+ 6 4 0 9 6 3 6 - 7 0 7 0 | W W W . S P R I N G N Z . C O . N Z | S A L E S @ S P R I N G N Z . C O . N Z
PUSH LOCK FITTING - INSTRUCTIONS
1.
Cut the 1/4" Pipe square and push into the fitting.
You must remove burrs and chamfer tube end for
metal pipes to pr
e
ven
t
the 0-ring seal being damaged.
2.
The Push lock fitting will grip before it seals. Ensure
the pipe is pushed into the fitting completely
3.
Pipe is secured in position
Disconnection
Push the collet against the pipe and slide out of the
push lock fitting to disconnect
PLUMBERS DELIGHT - INSTALLATION
Disassemble the original Cold Water Tap and/or Flexihose connection. Reconnect
the plumbers delight inline and use tee-off for the 1/4 inch connection to feed
machine
