Never touch the glass plate immediately after cooking. The surface of the
cooktop may remain hot due to the heat transferred from the cookware.
Do not damage the glass surface of the induction range. If the glass plate
is broken, turn the unit off and unplug it immediately. Call Spring USA
at (1) 630-527-8600 for service or warranty. Be sure to have your Model
# and Serial Number available when you contact our office or when
completing the service form on the website.
To clean your MAX Induction® Range, unplug the unit from its power
source. Wipe the unit down with a sponge or cloth with a mild
dishwashing liquid. Dry with a clean, soft cloth. Do not immerse the
induction range directly in water for cleaning – this will damage the unit.
Remember to clean the vent located on the underside and at the back of the
unit. Inspect the mesh air filter on the underside of the induction range,
each day. If it is soiled, remove the filter and wash it with dish washing
detergent. Dry and replace before operating the induction range.
Keep your induction range away from other ovens or stoves. If the
surrounding temperature is hot, your induction range may stop heating.
Before You Begin:
Read the following instructions in their entirety.
Use proper cookware. See specifications, below.
Check your ventilation. Your MAX Induction® Wok Range must have
the proper ventilation in order to operate correctly. There must be at least
4” of space available around your induction range.
Ensure that you have dedicated power to the installed location. Verify the
electrical requirements for your specific model induction range, as shown
on Page 4.
2
7
Suitable Cookware:
Your MAX Induction® Wok Range requires the use of induction-ready
Wok Pans.
For optimal heating and performance the induction woks shown below
should be used. The hemispherical shape of these Wok Pans are
specifically matched to the radius of the range glass and induction coil
inside the induction range.
Alternative wok pans may heat on the range, but optimal performance will
be achieved by using the pans designed specifically for this system.
The following Spring USA components are recommended for use with the
MAX Induction® Wok Range.
Mounting of the Control Panel:
To install the control panel, use the template provided. Please the template
on a plane or panel, perpendicular to the Wok Range, centering it to the
range whenever possible. Once you have cut the opening, insert the control
panel. Using the bracket provided, secure the control panel into place.
Connect the control box cable to the induction range.
Maintaining Your MAX Induction® Range:
Vulcano 32 cm Non-Stick
Wok Pan
4 Qt (130 oz)
Item # 8217-60/32
Primo! 34 cm Wok Pan
7.3 Qt (232 oz)
Item # 8217-60/34
5.315”
[135mm]
