Your MAX Induction
®
Range is designed to operate in two modes:
“Cook” or “Temp”.
“Cook” Mode offers you high-speed heating, used for omelet stations,
pasta bars or demonstration cooking.
“Temp” Mode offers you thermostatically controlled holding temperatures
for use with buffets or pastry work. The LED display allows for more
accurate cooking.
In “Cook” Mode:
An ‘E0’ code will flash until suitable cookware is placed on the glass
surface of the range.
The LED panel will display a two-digit number indicating the power
level. Power levels run from 1 thru 20.
As a safety precaution, if no cookware is placed on the induction
range plate after 2-1/2 minutes, the unit will shut off.
Once suitable cookware has been placed on the glass induction plate,
the unit will continue to cook until the range is manually shut down,
or the mode is changed over to “Temp” mode.
Note: As a safety precaution, make sure you have at least 4” of space at
the back of the Induction range. Induction ranges need ventilation to
operate efficiently.
In “Temp” Mode:
An ‘E0’ code will flash until suitable cookware is placed on the glass
surface of the range.
The LED panel will display a three-digit number indicating the
temperature setting. To increase the temperature setting, turn the dial
clockwise. To decrease the setting, turn the dial to the counter-
clockwise.
The induction range will continue to warm the food until the set
temperature has been reached. Once the temperature has been
reached, the range will maintain that pre-selected temperature setting.
Temperature settings in “Temp” mode, in Fahrenheit are:
110°, 120°, 130°, 140°, 150°, 160°, 170°, 180°, 190°, 200°, 220°,
240°, 260°, 280°, 300°, 320°, 340°, 360°, 380° & 400°.
Celsius: 43°, 49°, 54°, 60°, 66°, 71°, 77°, 82°, 88°, 93°, 104°, 116°,
127°, 138°, 149°, 160°, 171°, 182°, 193° & 204°.
Mounting of the Control Panel:
To install the control panel, use the template provided. Place the template
on a plane or panel, perpendicular to the MAX Induction
®
Range,
centering it to the range whenever possible.
The control panel cut out should measure 14-1/8” long x 5-1/8” wide.
Place the control panel into cutout hole. Using the metal bracket
provided, secure the control panel into place. The control panel is meant
to adjust ½” x ¾” thickness, depending on the surface it is being mounted
to. Connect the control box cable to the induction range.
6
How To Operate:
3
Electrical Specifications:
Plug & receptacle to be supplied
by Customer ~ Spring USA will
provide a wiring diagram. The
cord must be correct, based on
voltage & amperage per
Country’s Code requirements.
2500W x 2
50 – 60 Hz
220-240 V
20.8 Amps
SM-253-2CR
NEMA 6-30P 6’ Cord
2500W x 2
50 – 60 Hz
208-220 V
21.7 Amps
SM-251-2CR
Plug Type
Peak
Power
Voltage /
Amps
Model #
