Spring Air Systems KES Enviro, Руководство по эксплуатации и обслуживанию

Страница: 8 / 31

Enviro Maintenance Manual 2004
FILTER
NORMAL
PREFILTER
CLOGGED
BAG FILTER
CLOGGED
OVERIDE
BOX FILTER
CLOGGED
REMOVED
WARNING
FILTER
FIRE
14.0"
PANEL MOUNTING
HOLES LOCATED
IN PANEL BACK.
8.0"
5.0"
Remote RPW10 Panel Dimensions
Figure 6
Water Wash Ventilator System: AP, MP Panels
The KES unit off/on operation is controlled from the MP or AP water wash ventilator control panel. The fan
selector switch on the water wash control panel closes and sends power through terminals 3 & 4 to the
RPW10 remote panel to energize the exhaust fan through terminals 5 & 4 in the LV-10 J-Box. (The LV10 J-
Box is mounted on the KES-ISH filter section).
The “NORMAL” operation pilot energizes on the RPW10. After 30 seconds the KES control circuit within the
RPW10 remote panel is activated. See Figure 5 for RPW10 internal wiring. The exhaust fan motor is
energized through the terminals 9 & 4 to the motor starter located on the KESF fan section. See figure 11
for internal wiring of LV10 J-Box with RPW10 remote panel.
AUX!
LOGO!
01. 20. 03
Mo 09:00
Typical KES wiring to AP20C water wash panel
Figure 7