5
spray.com | 1.800.95.SPRAY | Intl. Tel: 1.630.665.5000
TROUBLE SHOOTING GUIDE
The following table indicates various potential modes of failure for this product.
Mode of Failure
Preventative or Corrective Actions
Poor spray performance
Check unit for external damage. Look for evidence of mishandling that may have damaged
shafts, bearings, or alignment.
Nozzle hub fails to rotate and
no liquid passes:
Check for liquid pressure and volume at the unit.
Check strainer for filter blockage.
Remove nozzles and check for obstructions.
While nozzles are off, recheck for flow through the body.
If the unit fails to rotate and
sufficient liquid passes:
Check for freedom of rotation, by hand, in the vertical and rotational axis.
If the unit is free and still does not rotate, check for:
1. Contamination in the unit.
2. Wear of any of the bushings or bearings.
3. Galling and straightness of the shaft.
WARNING:
Replace all defective or worn parts.
SPRAYING SYSTEMS CO. WARRANTY
Seller warrants that its products will conform to and
perform in accordance with the products’ specifications.
Seller warrants that the products do not infringe upon
any copyright, patent or trademark. THE FOREGOING
WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THOSE CONCERNING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
Because of the difficulty of ascertaining and measuring
damages hereunder, it is agreed that, except for claims for
bodily injury, Seller’s liability to the Buyer or any third party,
for any losses or damages, whether direct or otherwise,
arising out of the purchase of product from Seller by Buyer
shall not exceed the total amount billed and billable to the
Buyer for the product hereunder. IN NO EVENT WILL SELLER
BE LIABLE FOR ANY LOSS OF PROFITS OR OTHER SPECIAL
OR CONSEQUENTIAL DAMAGES, EVEN IF SELLER HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
For newly purchased units, the warranty is 18 months
from the date of shipment or 12 months from the date of
installation, whichever occurs first. This warranty
includes manufacturing defects but does not cover wear
of components. This warranty will be void if parts other
than those supplied by Spraying Systems Co. are used
or if the unit is modified by anyone other authorized
Spraying Systems Co. personnel. Modifications to the unit
may void the 3-A symbol and put the unit outside
3-A sanitary compliance.
.
