Spraying Systems Co GunJet AA27H, Руководство пользователя, Страница: 9 / 12

9
SAFETY LOCK ADJUSTMENT:
The operation of the safety lock should be checked before each spray period
or after a disassembly/reassembly procedure has been performed. Under no
circumstances should this spray gun be operated with an incorrectly adjusted
safety lock.
The Safety Lock (14) is correctly adjusted when there is no stem travel with
Safety Lock is in the "locked" position and trigger operation is attempted. A
visual check can be made by detecting no Stem Nut (9) movement while pulling
Trigger. If movement occurs, follow steps below:
1.
Loosen Set Screw (15) in Safety Lock Cam (14).
2. Take a half turn on Safety Lock Screw (13) in a clockwise direction so
that the flat sides are parallel to the sides of the Trigger (20).
3. Rotate Safety Lock Cam (14) counter-clockwise (in the "open"
position) as far as it will go. Tighten Set Screw (15).
4. Rotate Safety Lock clockwise (to the "locked" position) and test Trigger
(20). If no movement occurs, Safety Lock is properly adjusted. If
Trigger moves, repeat steps 1, 2 and 3 above.