Spraying Systems Co GunJet AA27H Скачать руководство пользователя страница 4

 

 

 

8.

 

DO NOT

 operate a spray gun if there are any leaks from the packings, 

fittings. hoses. etc. Fluids which are under high pressure can penetrate 

skin, cloth. etc. and cause serious injury. 

9.

 

DO NOT

 touch any metal parts of the gun or accessories when 

spraying hot liquids or severe injury can occur. 

10.

 

DO NOT

 handle a spray gun without a tip or nozzle any differently 

than one with a tip or nozzle. Even with the tip or nozzle removed, the 

spray gun can discharge a large volume of liquid at a high velocity. 

SAFETY SHOULD ALWAYS BE OBSERVED: 

1.

 

DO

 use a “two-handed” control of AA27H-- GunJet® at all times. Grasp 

spray gun firmly with both hands. 

2.

 

DO

 adopt a secure body stance prior to and during spray operation to 

safely control the high reactionary force of this unit. 

3.

 

DO

 impress on other people in the spraying area the importance of 

obeying strict safety precautions for everyone’s safety. 

4.

 

DO

 develop a habit of shutting off the power to the pump, relieving 

fluid pressure from gun and hose by actuating trigger until all fluid 

ceases to flow, and setting the trigger lock in the locked position, 

before attempting to remove the tip, nozzle, gun or any part of the 

gun…or when gun is not in use. 

5.

 

DO

 

check operation of 

Safety 

Lock before each spray period. Safety 

Trigg

e

r Lock 

must

 

hold 

the 

Trigger 

to 

its forward 

position. (Adjust if 

necessary - see section,

 “Safety Lock 

Adjus

t

ment” on page 7.)

 

6.

 

DO

 keep gun clean and dry to allow for positive grip. 

7.

 

DO

 carefully check and tighten threaded connections regularly. Make 

them secure and leak proof. 

8.

 

DO

 flush fun after each spray period, using the same safety 

precautions as used during spraying operations. Always use the lowest 

possible pressure of flushing. 

9.

 

DO

 use spray gun in a well-ventilated area and make sure spray gun is 

grounded properly when used in a possibly explosive or inflammable 

environment. A grounded type hose should be used. 

IMPORTANT: In case of the slightest appearance of skin penetration   

from spray, CONSULT A PHYSICIAN IMMEDIATELY!! 

Содержание GunJet AA27H













Отзывы: