SPRAYEZ-3000 Polyurethane Proportioner User Manual
18
5. System Operation
5.1
Check these items before operating
1. Make sure the TSL container is 4/5 full to prevent the ISO chemical in the booster
pump from crystallizing. The supply line (Coarser line) should in the cup 1/3 position,
return line (Finer line) in the bottom of the cup. (Figure 10).
Figure (10)
2.
Check that all connections are tight.
3.
Check the connection of power line and make sure it is properly grounded.
4.
Check that all switches on the control panel are in the OFF position.
5.
Check that the air supply regulator is in the OFF position.
Don’t put any parts of body in the range of spray.
Don’t let the gun point to someone.
Don’t look into the hole of the gun mixing chamber.
Please use proper PPE like mask, gloves, goggles and protective clothing.
5.2
Initial start (the first use of the new machine)
TSL CUP
SUPPLY LINE
RETURN LINE
Содержание SPRAYEZ-3000
