SprayEZ SPRAYEZ-3000, Руководство пользователя

Страница: 17 / 29

SPRAYEZ-3000 Polyurethane Proportioner User Manual
16
Main Switch for Heater:
The heater power switch controls the A and B heater power. Press this button and the
A, B temperature controller will display.
Hose Switch:
The hose switch controls the heated hose power. Press this button and the hose
temperature controller will display.
Temperature Controller:
A Isocyanate temperature controller for A side heater temperature display and set,
B Polyol temperature controller for B side heater temperature display and set,
Hose temperature controller for heated hose temperature display and set.
How to set temperature:
1. Press “MAIN SWITCH FOR HEATER” to “ON” position,
2. Press “SET” knob on the controller three times, the LED digital Contin ues
flashing,
3. Press ▲ or▼ to set the temperature,
4. Press “SET” one time to finish the setting.
Counts
For recording the booster pump stroke count, press the reset button on counter back to
zero.
ON/OFF Switch for Machine
This switch controls the booster pump movement. It has two positions, “ WORK” and
“ RESET.” In the WORK” position, the air motor drives the booster pump building
pressure on the system, in the “RESET” position, the air motor stops working.
4.6 Main Power Switch and Voltage Display
The main power switch (as Figure 8) is the total power switch, controls the heater
power, heated hose power and all electrical parts. Please note that even with this
switch in the off position, portions of the machine are still electrified. Please disconnect
power supply before servicing machine.
The voltage display show the shows the voltage of the currently connected power
supply.