11
Recall While in PSTN Mode
With the phone in Stand-by Mode, use the VOL Up and Down Arrow keys
to scroll through the numbers. When you find the number you want to call,
press the REDIAL button to place the call.
Speed Dial (from Stored Number Memory) While in PSTN Mode
With the phone in Stand-by Mode, press the
REDIAL button. The Green LEDs will turn on. Enter
the 2-digit number that represents your desired
number. The Green LEDs will switch to Blue once
the number has been dialed. (see p 17 for how to save numbers)
Speed Dial Number Guidelines
• ID numbers are numeric only, between
0 and 9. The total number sequence is
between 01 and 20.
• Speed Dial operations can only be
accessed while in Stand-by Mode.
• Anything not supported will turn on the Red LEDs. This includes:
• a number greater than 20
• the number doesn’t exist or
• no number is stored under that 2 digit ID
Flash Function While in PSTN Mode
During an analog call, press the FLASH button for Flash functions, such as:
• accept a second call while putting your current
call on hold
• alternate between the 2 calls
The default Flash time is set for 600ms (US
Standard).
Searching for Call History in Stand-by Mode
Press the VOL+/VOL- buttons to scroll through
your call history. The LCD will display the last 20
dialed/incoming numbers.
Deleting ALL Call History in Stand-by Mode
Press the MUTE button for 5 seconds while in
Stand-by Mode to delete your entire call history.
?
?
REDIAL
Speed Dial Number Illustration
2 Speed Dial Digits for each
Phone Number in Memory
