Spotlight ProfiLED 200 UD Скачать руководство пользователя страница 7

ProfiLED 200 UD

7

FUNCTIONING MODE

•  The fixture automatically detects the functioning tension in a range between 100÷240V.
•  The luminaire can be connected to a dimmer and, at the same time, it can be set through the local potentiometer or 

through a DMX console

•  Control priority: the fixture works according to LTP mode (Latest Takes Precedence)

SETUP CANALI:

 

•  3 CH   1 - Master Dimmer (Coarse)
 

2 - Master Dimmer (Fine)

 

3 - Strobo Effect (see side table)

•  2 CH   1 - Master Dimmer (Coarse)
 

2 - Strobo Effect (see side table)

•  1 CH   1 - Master Dimmer (Coarse)

1) LOCAL POTENTIOMETER Mode: In this mode it is possible to adjust the light output of the fixture from 0 to 100% 

by using the potentiometer knob 

 on the rear of the luminaire.

2) DMX Mode: To control this mode it is necessary the connection through DMX cable from a control device (ex. 

console) to the luminaire DMX IN connector. It is possible to assign any DMX address from 001 and 512, by using the 
buttons UP (+) and DOWN (-) and then confirming the choice with the button ENTER/MODE. More luminaires can be 
chain connected, connecting the DMX THRU of a luminaire to the DMX IN of the following fixture.

SET-UP MENU (see Fig. 2)

When the display is off, push any button to activate the visualisation. 
Push the MENU button to access the luminaire set-up. 
With the buttons UP (+) or DOWN (-) it is possible to change the set-up values. 
Press ENTER/MODE to confirm and pass to the following option.

• DIMM: curve selection and set up effect
• UDIM: enables / disables  the light intensity/output through the dimmer
• DISP: activate / deactivate Display
• FRE: PWM frequence set up 
• FAN: fan silence / speed set up
• CAL: Min / Max value limits set up of light intensity
• DFSE: reset to manufacturer set up
• CHAN: setup channels to be used
• REM: Not implemented

     CHANNEL 3 (Effect Channel) - DMX TABLE

DMX - effect

DMX  - range

Dimmer

0 - 9

Sync Strobo Effect (from 0,5 to 30Hz)

10 - 57

Dimmer

58 - 59

Pulse Effect from ON to OFF (slow to fast)

60 - 108

Dimmer

109 - 110

Pulse Effect from OFF to ON (fast to slow)

111 - 159

Dimmer

160 - 161

Random Strobo (slow to fast)

162 - 207

Dimmer

208 - 209

Random Strobo (slow to fast)

210 - 255

Содержание ProfiLED 200 UD









Отзывы: