manualshive.com logo in svg

Spotlight Fresnel LED Hyperion 300 6C, Руководство пользователя, Страница: 26 / 28

Поделиться
Скачать
Spotlight Fresnel LED Hyperion 300 6C Скачать руководство пользователя страница 26

Profile LED Hyperion 300 6C

26

- MASTER AUTO SCENE: the luminaire ignores the 

dmx signal and the potentiometers, performs the 
memorised scenes sequence selectable from the 
“STANDALONE” -> “AUTO SCENE MODE” menu and 
sends on the DMX line out the command to perform 
the same sequence on the luminaires connected via 
DMX

- SLAVE: the luminaire ignores the dmx signal and 

the potentiometers, and it performs the instructions 
received by the MASTER luminaire on the DMX line.

The mode setup is saved, displayed in the main screen, 
and it will reappear as active when the luminaire is 
switched on again.
------- ......
If at the startup the MASTER luminaire (in manual or 
auto scene mode) detects a DMX IN signal, it will sho 
the set scene or sequence but it will not transmit it 
to the SLAVE luminaires and it will show in the main 
sceen that DMX line is busy. To have the system working 
correctly the DMX IN source must be eliminated.
When one of the standalone modes is active, the 
luminaire ignores the standard dmx signal and the 
potentiometers.

MENU STAND ALONE -> MANUAL MODE

-  Push UP or DOWN to select which item to edit (RED, 

GRN, etc. is highlighted). 

-  Press ENTER to proceed with the editing: the 

value next to the item lights up. Use the dimmer 
potentiometer to edit the value.

-  Press ENTER to confi rm the editing, ESC to go back.
-  Once all the desired items are edited:

-  move to CONFIRM and press ENTER to confi rm 

or move to ABORT and press ENTER to cancel the 
changes.

-  Press ESC on any entry to exit without saving the 

changes.

RDM

This fi xture supports the RDM protocol, latest version 
(ANSI E1.20 - 2010). The following parameters are 
supported:

Plasa/ESTA Denomination

Number of Channels

DEVICE_INFO

Reading of the following parameters:
- RDM protocol version
- Device Model ID
- Product category
- ID version sw
- Number of DMX channels
- DMX mode index
- DMX address
- Number of sub-devices
- Number of sensors

IDENTIFY_DEVICE

LEDs power on to allow to visually 
identify the fi xture

DMX_START_ADDRESS

DMX address setting/reading

SOFTWARE_VERSION_LABEL Text description version sw

SUPPORTED_PARAMETERS

List of supported parameters

DMX_PERSONALITY

DMX mode setting

DMX_PERSONALITY_

DESCRIPTION

Obtaining textual description of 
DMX mode

DEVICE_MODEL_DESCRIPTION Text description of the device model

MANUFACTURER_LABEL

Text description manufacturer

SENSOR_DEFINITION,

SENSOR_VALUE

Display of the values read by the 
temperature sensor, expressed in 
tenths of Celsius degree

STAND ALONE / MASTER / SLAVE MODE

The luminaire can work also without the DMX or 
potentiometers control. You can select in which mode to 
work selecting “STANDALONE” -> “STANDALONE MODE”
The foreseen modes are:
- DISABLED: the luminaire is controlled by the dmx input 

and by the potentiometers

- STANDALONE MANUAL: the luminaire ignores the dmx 

signal and the potentiometers and the colour can be set 
from the “STANDALONE” -> “MANUAL MODE” menu

- STANDALONE AUTO SCENE:  the luminaire ignores the 

dmx signal and the potentiometers and performs the 
memorised scenes sequence, (max 10 scenes), selectable 
from the “STANDALONE” -> “AUTO SCENE MODE” menu

- MASTER MANUAL: the luminaire ignores the dmx signal, 

turns to a fi x colour selectable from the “STANDALONE” 
-> “MANUAL MODE” menu and sends on the DMX line 
out the command to activate that specifi c colour on the 
luminaires connected via DMX

         

         

          

          

MANUAL

RED  000 

AMB 000

GRN 000 

CYA  000

BLU 000 

LIM  000

ABORT CONFIRM

Содержание Fresnel LED Hyperion 300 6C





























Отзывы:

Нет отзывов