
Profile LED Hyperion 300 6C
25
SERVICE 2 - COLOUR CALIBRATION saving mode
1. The colour calibration is available only for the dmx
RGBACL and FULL modes
2. Set the fi rst 6 DMX channels on the desired
calibration values R, G, B, A, C, L
3. Select the COLOUR CALIBRATION range (192..197) on
the SERVICE channel (in the SERVICE 2 format)
4. Move the ADVANCED STROBO channel in the SERVICE
2 range (231..240); the luminaire switches on at the
calibration values set on channels 1..6
5. Keep on hold for 5 secs.
6. Three fl ashes confi rm that the operation was
completed.
When the dmx channel SERVICE 2 is in the COLOUR
CALIBRATION area and the dmx ADVANCED STROBO
channel is in the SERVICE 2 range the luminaire switches
on at the calibration values set in channels 1..6: during
this phase it is possible to adjust these calibration values;
it will be then enough to move the dmx ADVANCED
STROBO channel out of the SERVICE 2 value range, and
then take it back to that range and wait for 5 seconds to
have the calibration values saved. The operation will be
confi rmed by three fl ashes of the luminaire.
SERVICE CHANNEL
SERVICE 1 - valid if dmx channel ADVANCED STROBE
is in SERVICE 1 area
Ch Name
DMX Value
xx SERVICE
0..5
INACTIVE
6..30
SAVE CUSTOM PRESET 1
31..55 SAVE CUSTOM PRESET 2
56..80 SAVE CUSTOM PRESET 3
81..105 SAVE CUSTOM PRESET 4
106..130 SAVE CUSTOM PRESET 5
131..155 SAVE CUSTOM PRESET 6
156..180 SAVE CUSTOM PRESET 7
181..205 SAVE CUSTOM PRESET 8
206..230 SAVE CUSTOM PRESET 9
231..255 SAVE CUSTOM PRESET 10
CANALE SERVICE
SERVICE 2 - valid if dmx channel ADVANCED STROBE
is on SERVICE 2 area
Ch Name
DMX Value
xx SERVICE
0..5
INACTIVE
6..11
LED DELAY OFF
12..17 LED DELAY 30ms
18..23 LED DELAY 60ms
24..29 LED DELAY 120ms
30..35 LED DELAY 180ms
36..41 LED DELAY 240ms
42..47 LED DELAY 300ms
48..53 LED DELAY 360ms
54..59 LED DELAY 420ms
60..65 LED DELAY 480ms
66..71
LED DELAY 600ms
72..77 CURVE LINEAR
78..83 CURVE QUADRATIC
84..89 FREQUENCY 500Hz
90..95 FREQUENCY 800Hz
96..101 FREQUENCY 1000Hz
102..107 FREQUENCY 1500Hz
108..113 FREQUENCY 3000Hz
114..119 FREQUENCY 5000Hz
120..125 FREQUENCY 10000Hz
126..131 FREQUENCY 15000Hz
132..137 FREQUENCY 20000Hz
138..143 LED BOOST ON
144.149 LED BOOST OFF
150..155 FAN MODE AUTO
156..161 FAN MODE STANDARD
162..167 FAN MODE SILENT
168..173 DISPLAY STANDARD
174..179 DISPLAY ROTATED
180..185 DISPLAY OFF
186..191 DISPLAY ON
192..197
COLOUR CALIBRATION (set the fi rst
6 channels on the calibration values,
keeping them for 5 seconds). *Active
value range only for dmx RGBACL and
FULL mode
198..203 DEFAULT SET
204..255 FREE - INACTIVE