20
5.
Insert an Ø8
-
10mm drift punch into the main pivot bore from where the drive side pivot axle was
removed. Ensure firm, even contact with the inner face of the non
-
drive side pivot axle. Strike the
drift punch sharply with a hammer to unseat the non
-
drive side pivot axle:
6.
With the rear shock assembly removed from the frame, the rear triangle is now able to swing up-
ward away from the front triangle. Place a hand under the main pivot yoke while slowly swinging
the rear triangle up and rearward to catch the inner pivot washers and o
-
rings:
