Sporty's Air-Scan V, Руководство оператора

Страница: 16 / 26

14
Once the desired memory channel is selected, press the Memory key and the frequency will be
stored. If you are overwriting an existing memory channel, the Air-Scan
® V will beep to let you
know that a frequency is already stored there. You must push the Memory key a second time to
store the new frequency. Remember, the old frequency will be erased when your selected
frequency is stored.
You may exit the memory function by pressing the Clear key any time prior to storing the
frequency (pressing the Memory key the second time).
Memory Recall
To recall a frequency stored in a memory channel, select the Aviation band by pressing the Band
key until AIR appears in the upper left-hand corner of the screen. Then press the Recall key. The
memory channel number and the corresponding frequency of the first memory channel that is
being used will be displayed. This frequency immediately becomes the active frequency and is
received by the Air-Scan V.
In this example, memory channel 2 is listed first, meaning that no frequency is currently being
stored in memory channel 1.
At this point you may select any stored memory channel by pressing the Up or Down key to scroll
through the stored frequencies. For example, to receive memory channel 5 you may:
1. Press the Recall key followed by the Up or Down key to scroll to 5.
Once in the Recall mode, the Air-Scan ® V stays in Recall until the Clear key is pressed. This
allows you to sequence your frequencies in the order you may wish to use them. For example, you
may wish to store your airport's Unicom in memory 1, Clearance Delivery in 2, Ground Control in
3, Tower in 4 and Departure Control in 5. For this example you would press the Recall key once
01
MEM
2
122.975
AIR MEM