Sporty's Air-Scan V, Руководство оператора

Страница: 14 / 26

12
Frequency Search
To manually search through the frequency range of any of the bands (AM, FM or Aviation), the Up
key or Down key may be pressed at any time to select the next higher or lower frequency. This
uses 10 kHz steps in the AM frequency range, 100 kHz steps in the FM frequency range and 8.33
kHz steps in the Aviation frequency range. The Up and Down keys may be pressed repeatedly to
continue changing the selected frequency.
To automatically search the entire frequency range of the current band for a broadcasting signal,
the Up key or Down key may be pressed and held for one second. The Screen will display SRCH
as seen below.
The frequencies will either scroll up or down depending upon whether the Up or Down key was
used to initiate the search.
When a broadcasting signal is found, the Air-Scan ® V will stop temporarily on that frequency. If
the broadcasting signal is cut off for more than two seconds, the search will resume until another
signal is found. When the end of the frequency range is reached during an upward search, the
search automatically continues searching at the beginning of the frequency range. Likewise, when
the beginning of the frequency range is reached during a downward search, the search
automatically continues at the end of the frequency range.
The search may be canceled at any time by pressing the Clear key. The direction of the search
may also be reversed at any time by pressing and holding the Up or Down key (whichever is
appropriate) for one second.
NOTE: On the Aviation band it is very important that the squelch
be properly adjusted prior to initiating a search. The
background static received with the squelch off may be
strong enough to disrupt a search. If a search gets "stuck"
on a frequency with too much background noise, increase
the squelch or press and hold the Up or Down key for one
second to skip that frequency and resume searching.
AIR SRCH
122.975