Sporty's Air-Scan JD-100, Руководство оператора

Страница: 13 / 16

Key Lock
Inputs from the keypad may be locked out at any time by pressing and holding the Key
Lock Button. The JD-100 will beep letting you know that the key lock has been activated,
and KEY.L will be displayed at the Top of the screen as shown below.
Key Lock is also deactivated by pressing and holding the Key Lock Button. The JD-100
will beep when the key lock has been deactivated, and KEY.L will no longer be
displayed at the Top of the screen.
Low Battery Indicator
When the batteries need replaced, BATT will be displayed at the top of the screen and the
displayed frequency will flash.
Screen Lighting
Press and release the Light Button to activate the JD-100’s screen lighting for five
seconds. To activate the screen lighting indefinitely, press and hold the Light Button for
one second until a beep is heard. When this is done, the Light Button must be pressed a
second time to turn the lighting off.
Key Tone
To deactivate the key tone function of the JD-100, press and hold the CLR Key then
press the 1 Key. The screen will prompt BP OFF as shown below.
To activate the key tone function, press and hold the CLR Key then press the 1 Key. The
screen will prompt BP ON as shown below.
The key tone function is set in the “on” position at the factory.