Sporty's Air-Scan JD-100, Руководство оператора

Страница: 11 / 16

You may exit the memory function by pressing the Clear Key any time prior to storing
the frequency (pressing the Memory Key the second time).
Memory Recall
To recall a frequency stored in a memory channel, press the Recall Key. The memory
channel number or “P” and the corresponding frequency of the first memory channel that
is being used will be displayed. This frequency immediately becomes the active
frequency and is received by the JD-100.
In this example, memory channel 01 is listed first, so we know that no frequency is
currently being stored in memory channel P.
At this point you may select any stored memory channel by either pressing the Up or
Down Key to scroll through the stored frequencies or by entering the memory channel
number by using the Numeric Keypad. For example, to receive memory channel 08 you
may either:
1. Press the Recall Key followed by the Up or Down Key to
scroll to 08
or
2. Press the Recall Key followed by 0 8.
Once in the Recall function, the JD-100 stays in Recall until the Clear Key is pressed.
This allows you to sequence your frequencies in the order you may wish to use them. For
example, during an airshow you may wish to store the airport’s tower in memory channel
P, military traffic in channel 01, civilian traffic in channel 02, and airshow control in
channel 03. For this example you would press the Recall Key once followed by the Up
Key for every frequency change instead of having to enter each frequency manually.
While in the Recall function the only entries accepted are Numeric Keypad entries
between P and 19, the Up or Down Key or the Clear Key. All other inputs cause the JD-
100 to beep. Remember, you may press the Clear Key at any time to exit the Recall
function. Once you have left the Recall function, the JD-100 will remain on the last
frequency that was being received.
Memory Scan
The Memory Scan function is very similar to the Search function, except it only scans
those COMM frequencies stored in the memory channels. To Scan the memory
channels, press the Recall Key to enter the Recall function. Then press and hold the Up
or Down Key for one second to initiate either an upward or downward Scan. The word