• Turmoil ARR
www.sportwerksRC.com
Preparing the Engine for Installation
Note
: If you’re assembling the Turmoil
™
Pro with engine version
(#SWK1155), the engine, clutch and exhaust system are already
installed. Skip this section and proceed to page 15, Installing the
Radio System.
Required Items (included)
• Flywheel (SWK3190)
• Flywheel Collet (SWK3192)
• Clutch Nut (SWK3194)
• Clutch Springs (3) (SWK3196)
• Clutch Shoe (3) (SWK9196)
• 13-Tooth Clutch Bell (SWK3213)
• 5x10mm Clutch Bearings (2) (SWK2620)
• 3x6mm Cap Head Screw (SWK2122)
• 3mm Washer (SWK2282)
• Clutch Shim (SWK3194)
• Engine Mount (SWK9230)
• 3x12mm Engine Mounting Screws (4) (SWK2028)
Required Items (not included)
• Engine w/SG Type Crankshaft
• Exhaust System
Shim
Clutch Spring Shim
3x8mm screw
3mm Washer
Shim
Clutch Bell
Clutch Bearing
Clutch Spring
Clutch Nut
Clutch Shoes
Flywheel
Collet
Tuned Pipe
Manifold Adapter
Manifold Spring
Exhaust Springs
Exhaust Manifold
3x12mm Screw
Engine Mount
Return Spring
Clutch Bearing
1. Install the flywheel collet, then the flywheel and then the
clutch nut in that sequence on the crankshaft as shown in the
illustration.