26
Dismantling
:
1. Clean and check your gym mat and accessories after each use. After use in water, rinse everything
to ensure that any residue is removed. Use mild soapy water or fresh water.
IMPORTANT: Do not
use detergents or silicone-based cleaners!
2. Make sure the valve and the valve environment are free from water and dirt before removing the
safety cap.
3. Open the valve cover and turn the pin 90 degrees counterclockwise so that it is in its lowered positi-
on and the air can escape.
4. Connect the air pump to the valve in "DEFLATE" mode and switch it on. As soon as the air is com-
pletely sucked out, roll your TM400 towards the valve.
Pressure relief valve
5. Fix the gymnastics mat with the included belt strap before packing so it can be conveniently stowed
in the included bag and later unpacked.
„DEFLATE“
„INFLATE“
ON / OFF
switch