30
Step 5
Step 6
A. Attach sliding rail (35) in main frame (6) with bolt (26), washer (27) and cap nut (28); using Allen
wrench (B) and spanner (D).
B. Hold the main frame (6) by hand. Fix sliding rail (35) to main frame (6) with knob (33) and washer
(34). Then insert securing pin (29).
A. Connect computer wire (1a) and sensor wire (55).
B. Remove the screws (2) from the back of computer (1), using the cross-tip screwdriver (C). Then
fasten computer (1) to holder (47) with screws (2), using the cross-tip screwdriver (C).
The assembly is complete!
• As a final step, re-check the
tightness of all connections.
• Repeat this check before each
training session.
33
34
35
6
29
28
26
27
D
S17
S19
S6
B
#26 M10x85x20xS6 1PC
#27 d10xØ20x2 1PC
#28 M10xH16xS17 1PC
#29 Ø8x75x80 1PC
#33 M12x30xØ16x15xØ56 1PC
#34 d12xØ24x2 1PC
2
#2 M5*15 4PCS
C
1a
1a
55
47 55
S15
S13
S14
1
Please clean this device thoroughly before first use and after assembly, as oil residues and dust
deposits may be present on it, due to production and packaging process.